PRODUCT

PANELS INVERTERS BATTERY RACKING ELECTRICAL MODULAR CIRCUIT PROTECTION
  •                  

    Jinko Solar (NYSE: JKS) is a global leader in the solar industry. Jinko Solar distributes its solar products and sells its solutions and services to a diversified international utility, commercial and residential customer base in China, the United States, Japan, Germany, the United Kingdom, Chile, South Africa, India, Mexico, Brazil, the United Arab Emirates, Italy, Spain, France, Belgium, and other countries and regions. Jinko Solar has built a vertically integrated solar product value chain, with an integrated annual capacity of 5.0GW for silicon ingots and wafers, 4.0GW for solar cells, and 6.5GW for solar modules, as of December 31, 2016.


    ● 4 Busbar Solar Cells

    ● High Power Output Polycrystalline 60-cell module achieves a power output up to 275Wp

    ● PID (potential induced degradation) Resistant

    ● Low-light Performance: Advanced glass and solar cell surface texturing allow for excellent performance in low-light environments

    ● Severe Weather Resilience: Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal) 

    ● Durability against extreme environmental conditions: High salt mist and ammonia resistance certified by TUV NORD

    ● Temperature Coefficient: Improved temperature coefficient decreases power loss during high temperatures

    ● Advanced Mono Technology 

    ● New Perc Technology gives you higher efficiency modules

    ● 4 Busbar Solar Cells

    ● High Efficiency: Higher module conversion efficiency (up to 18.33%) benefit from Passivated Emmiter Rear Contact (PERC) technology

    ● PID Resistant: Limited power degradation of Eagle module caused by PID effect is guaranteed under strict testing condition (85/85%RH, 96hours) for mass production

    ● Low-light Performance: Advanced glass and solar cell surface texturing allow for excellent performance in low-light environments

    ● Severe Weather Resilience: Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal) 

    ● Durability against extreme environmental conditions: High salt mist and ammonia resistance certified by TUV NORD


    ● High Power Output Polycrystalline 72-cell module achieves a power output up to 330Wp 

    ● PID (potential induced degradation) Resistant

    ● Low-light Performance: Advanced glass and solar cell surface texturing allow for excellent performance in low-light environments

    ● Durability against extreme environmental conditions: High salt mist and ammonia resistance certified by TUV NORD

    ● Temperature Coefficient: Improved temperature coefficient decreases power loss during high temperatures


    ● Embedded Smart Panel with SolarEdge Optimisers 

    ● Maximum Power: Integrated optimiser mitigates power loss from panel-to-panel mismatch caused by shading, soiling, aging, and unfavourable roof orientations to ensure maximum power output

    ● Installation benefits: Provides more installation options for various roofs and orientation limitations

    ● Hotspot elimination: Hotspots are eliminated and panel degradation is minimised

    ● Safety: Module level disconnects provide safety and regulation compliance


    ● Built-in intelligent cell optimiser IC avoids negative consequences of any type of mismatch within a panel caused by shading, soiling, aging, unfavourable house orientation, etc to ensure greatest power output possible

    ● The most flexible solution for any rooftop condition and orientation

    ● Elimination of hot spots, which results in minimised panel degradation

    ● Best-in-class shade tolerance by performing MPPT on individual cell-strings to maximise energy harvest

    ● Anti-electromagnetic interference

    ● No added hardware, compatible with any inverter and optimisation built into the module

    HT-SAAE is a government owned company, which is operated, by China Aerospace and Science and Technology Corporation (CASC), and one of the Global Fortune 500 Company. HT started out research on solar technology application in space since 1960's. As a leading vertically integrated manufacturer of ingots, wafers, cells, solar modules and solar systems. Our PV industry delivers solar products of uncompromising quality to worldwide customers. 


    ● Guaranteed positive power output reliability

    ● PID (potential induced degradation) Resistant

    ● All HT modules are double EL tested avoiding invisible cracks, dark cells and broken bars to ensure the performance, quality and reliability 

    ● Excellent performance under low light environments (mornings, evenings and cloudy days)

    ● All the modules are sorted and packaged by amperage, reducing mismatch losses and maximising system output 

    ● HT-SAAE guarantees highest production standards: IEC 61215, IEC 61730, IEC 62716 (Ammonia corrosion) & (Salt Mist Corrosion) 

    ● Strike quality control, meeting the highest international standards: ISO 9001, ISO 14001 and OHSAS 18001

    Founded in 2000, Xi'an LONGI Silicon Materials Corp. is the largest single crystal manufacturer in the world, and engaged in providing high-quality product and service for photovoltaic and semiconductor products. 

    April 2012, the Company was listed on the Shanghai Stock Exchange ( Code 601012). In February 2013, the Company was awarded as the “The Top 10 Most Innovative Enterprises in China in2013” by American famous media Fast Company. In September 2014, LONGI Stock was selected as the “Future Top 100 for Chinese Enterprises” published by ACCA and ranked the 17th. In December 2014, the Company was selected as “Top 50 Listed Companies in China West”; In 2015, the Company was rewarded as “2015 China Energy Source Innovative Reward” by China Energy Development and Innovation Forum.


    ● Positive Power Tolerance: 0~+5W positive tolerance of maximal power guaranteed

    ● High Conversion Efficiency: The highest efficiency up to 18.04%

    ● Excellent Performance in Low irradiance: Outstanding power output in low irradiance conditions, such as dawn, dusk and cloudy days

    ● Anti-PID: Anti-PID techniques of processing solar cells and encapsulating modules applied; adaptable for the installation in hot and highly humid areas

    ● Adaptability to the Harsh Environments: Excellent anti salt mist and anti-ammonia capability and is adaptable to the harsh environments such as seaside and farms 

    ● Super Robust Frame, 40mm Thickness: Good pressure resistance and able to bear 2400Pa wind load and 5400Pa snow load


    ● New Perc Technology gives you higher efficiency modules

    ● High power output30W higher than industry level in mass production

    ● High yield performance: Enhanced spectral response at longer wavelength boosts low-light generation performance, which can produce more than 3% additional power compared with conventional module at system side

    ● High module quality: High reliability in extreme temperature environment with special cell technology and strict BOM selection 

    ● The effectiveness of the investment: In theory, the internal rate of return of the monocrystal ground power station is 16% to 27% higher than that of the polycrystal ground power station, Also, the internal rate of return of the monocrystal roof powerhouse is 16% to 27% higher than that of the polycrystal roof powerhouse 

    Link Energy has partnered with Powerark solar Australia to provide an Australian favoured product. Powerark Solar is one of Australia’s leading renewable energy distributors. Headquartered in Sydney, the company’s operations expand across WA, VIC, QLD and SA, which enables us to accommodate customers from across Australia.

    Our products are made of the highest quality materials combined with innovative technologies to manufacture Polycrystalline & Monocrystalline panels that will stand the test of time. Our factory is certified to ISO 9001& 14001 and our products are certified to TUV standard. Our products are approved and listed with the Clean Energy Council as well as approved by the Australian Solar Council.

    ● 0 - 5W power tolerance

    ● 4 Busbar Solar Cells

    ● 40mm Robust frame with IP67 Junction box

    ● High efficiency, all the innovative manufacturing technology, brings high conversion efficiency (up to 16.49%)

    ● Excellent temperature coefficient giving higher yields in the long-term

    ● Certified to withstand increased loads of up to 5400Pa

    ● Outstanding performance in weak-light conditions

    ● Local Australia design and warranty support 


    ● High Efficiency Mono Technology

    ● 0 - 5W power tolerance

    ● 40mm Robust frame with IP67 Junction box

    ● High efficiency, all the innovative manufacturing technology, brings high conversion efficiency (up to 17.11%)

    ● Excellent temperature coefficient giving higher yields in the long term

    ● Certified to withstand increased loads of up to 5400Pa

    ● Outstanding performance in weak-light conditions

    ● Local Australia design and warranty support

    Hanover Solar is leading solar cell technology manufacture, their headquarter is located in Hanover, Germany and is responsible for managing all global branch companies, as well as the sales and warehousing of German local market. The manufacture has a combined annual capacity of 300mw for solar modules and cells. Hanover Solar does their R&D in their headquarters, with the professional team of engineers from Germany. Hanover is using the advanced technology, automatic ABB production equipment, as well as a scientific and strict Germany management mode. Hanover Solar modules are widely used in commercial and residential projects in Europe, Japan, New Zealand and Australia. It allows end-users to fully appreciate the high quality of German products at an affordable price. 

    ● German Engineered, made in China & Indonesia 

    ● Black or Silver Frame available 

    ● The seal tape for solar module which could protect the panel in all ways 

    ● The certification of 1PX7 class waterproof level guaranteed there is no water leaking into the panel

    ● The glass has more than 1,000,000 condenser lens to absorb more photon, which world generates 5% up of power output

    ● Back sheet: To improve its protection the double side back sheet fluorine has been used to isolate the cells

    Astronergy has been a trusted provider of monocrystalline and polycrystalline PV modules since its founding in 2006. Astronergy specializes in cutting-edge research, development and production of high-efficiency solar modules. With over 10 years of steady development, Astronergy achieves significant growth in terms of capacity expansion and downstream engagement. 

    Astronergy expanded its production capacity from 25MW to 3000MW in the trend of embracing clean energy around the world. Astronergy is also one ofthe biggest solar project developers in China.

    In 2014, Astronergy acquired Conergy’s production plant located in Germany and became the first Chinese solar company to establish a productionfacility in Germany. The merge of the German plant increased Astronergy’s market share in EU significantly combined with another 5 production sites around the world in Hangzhou, Haining, Jiuquan, Thailand and Malaysia.

    ● High Power Output

    ● Excellent Performance at Low Irradiance
    ● More Credible and Precise PR Value Simulation

    ● Stringent Production Quality Control PID Free Ability
    ● More Cycles in-house Reliability Test

    ● Linear Power Output Warranty
    ● The 3rd party Insurance
    ● Independent Engineering Due Diligence Report 

1300 887 557
info@powerarksolar.com
HOME
HOME
ABOUT US
ABOUT US NEWS EVENTS
PRODUCTS
PANELS INVERTERS BATTERY RACKING ELECTRICAL MODULAR CIRCUIT PROTECTION
DOWNLOAD CENTER
PANELS INVERTERS BATTERY RACKING ELECTRICAL MODULAR CIRCUIT PROTECTION
CONTACT US
CONTACT US RECRUITMENT
Copyrights © 2017 Powerark Solar Pty Ltd All Rights Reserved.